PENN-GRADE 1
HIGH PERFORMANCE OILS


BRAD PENN PENN-GRADE 1 High Performance Oils are specially formulated using high quality PENN-GRADE base stocks and select additive technologies to meet the stringent lubricating demands of high-performance, highly stressed, street and racing engines.

BRAD PENN PENN-GRADE 1 High Performance Oils deliver excellent shock load and high temperature protection to heavily stressed engine parts including bearings, camshafts, rings, and pistons. They reduce internal friction for increased horsepower output while maintaining their strong lubricating film protection even under the most demanding torque and extreme temperature conditions. These high performance formulations also provide good antifoaming and shear stability characteristics, excellent high temperature protection from thermal breakdown, outstanding film strength, and strong anti-wear properties.

BRAD PENN PENN-GRADE 1 High Performance Oils have a distinct green color and are available in five multi-grade, and four mono grade viscosities to meet virtually all lubricating requirements of high performance street and racing engines.

BRAD PENN PENN-GRADE 1 Partial Synthetic SAE 10W-30, 10W-40, 15W-40 and SAE 20W-50 Multi-grade High Performance Oils are formulated with a typical TBN of 10.6 to provide high level of detergency for protection against bearing corrosion and piston deposits in both turbocharged and non-turbocharged engines. These engine oils provide outstanding "heavy load" bearing protection on heavily stressed engine parts. The synthetic component of these engine oils enhances the protection afforded at high and low temperature extremes.


BRAD PENN PENN GRADE 1 SAE 30 and 40 Monograde High Performance Oils offer a typical TBN of 9.5 and 10.6 (SAE 30). They are fortified with an anti-wear agent proven to be highly effective in the regime of extremely stressed engines.


BRAD PENN PENN-GRADE 1 "Nitro" 70 Monograde High Performance Oil is specifically formulated for gas, alcohol, and nitromethane fueled engines that experience extreme torque, load, and high temperature conditions. TheBRAD PENN PENN-GRADE 1 SAE 50 is also suitable for use in gas, alcohol, and nitromethane fueled engines where this viscosity is desired. The initial high viscosity of these oils allows excessive dumping of fuel ("blow by") into the lubricating fluid while maintaining critical protection for expensive, high performance racing engines and their components.


PENN-GRADE 1 BREAK-IN OIL


BRAD PENN PENN-GRADE 1 BREAK-IN OIL provides wear control for critical engine parts while allowing the engine components to seat, resulting in maximum engine performance and life. It is formulated with Penn Grade Base Stocks and a state-of-the-art additive system, available in SAE 30.


BRAD PENN PENN-GRADE 1 BREAK-IN OIL is an optimum choice for professional engine builders.


PENN-GRADE 1 V2 4-STROKE
HIGH-PERFORMANCE SAE 10W-40 MOTORCYCLE OIL


Blended with Pennsylvania Grade base oils, select synthetic components and superior additive chemistry, BRAD PENN PENN-GRADE 1 V2 4-Stroke High Performance SAE 10W-40 Motorcycle Oil is specifically formulated to offer the ultimate in quality, performance, and protection for motorcycles. Unlike most other multi-viscosity motorcycle oils, the very unique viscosity modifier used in our Brad Penn oil is not based upon conventional polymers which can shear significantly with use and cause loss of oil viscosity. This viscosity modifier imparts exceptional High Temperature High Smear viscosity protection to our BRAD PENN PENN-GRADE 1 V2 4-Stroke High Performance SAE 10W-40 Motorcycle Oil that is so critical for protection of high speed, high revving motorcycle engines. Further, in applications where the same oil is used for lubrication of both the engine and transmission, the excellent shear stability of this motorcycle oil offers a distinctive operational advantage over other less shear-stable oils. Increased levels of "zinc" (zinc dialkyldithiophosphate) in BRAD PENN PENN-GRADE 1 V2 4-Stroke Performance SAE 10W-40 Motorcycle Oil provide exceptional anti-wear/anti-scuffing protection. Detergents, dispersants and anti-oxidants offer protection from thermal and/or oxidative oil breakdown that can lead to varnish and deposit formation. Anti-foam agents reduce oil foaming and air entrainment under high-speed and/or high-RPM operation.


PENN-GRADE 1 V2 4-STROKE
HIGH-PERFORMANCE SAE 20W-50 MOTORCYCLE OIL


BRAD PENN PENN-GRADE 1 V2 4-Stroke High Performance SAE 20W-50 Motorcycle Oil is formulated with mineral based Pennsylvania Grade base oils and superior additive chemistry specifically designed with twin V domestic and imported motorcycle engine technology/lubrication needs in mind. It provides increased levels of "zinc" (zinc dialkyldithiophosphate) for exceptional anti-wear/anti-scuffing protection. Detergents, can lead to varnish and deposit formation. Anti-foam agents reduce oil foaming and air entrainment under high-output, high revving conditions.