Home

DURATAC Chain Oil designed for chains, guide bars, journal bearings, sprockets, and chain saws. Designed to reduce dripping and throw-off. Also for general machine lubrication where tacky, non-drip oil is required. Available in the following viscosity grades: 32 (dyed red), 68, 100, 150 (dyed red).

DURATAC Non-Drip Oil adheres strongly to metal surfaces. Ideal for use in printing shops, saw mills and for chain saw bars and conveyor chains. Available in the following viscosity grades: 32, 68, 100, 150, 220.

PETROGLIDE – Saw Guide Oil designed for multi-blade, gang saws and edgers. Less wash-off and better lubricity. Greater recovery with excellent extreme pressure properties. Dioxin formation and environmental damage is reduced. Available in the following viscosity grades: 60, 100, 150.

PETROGLIDE MC 32 – Saw Guide Oil designed for mist lubricated bandsaws. Lubricates without excessive spray mist to reduce oil usage. Less wash-off resulting in reduced oil consumption. Rust inhibitor keeps blades cleaner. Available only in ISO grade 32.

PETROGLIDE XP 90 – Saw Glide Oil designed for gang saws, curve saws and arbour edgers. Provides optimum tackiness and reduced friction for increased recovery rates and productivity. Inherently biodegradable and free of heavy metals. Rust inhibitor keeps blades cleaner. Available in viscosity grade: 90.

SEPRO XL – Paper Machine Oil recommended for environmentally-sensitive areas. Resists oil degradation better than conventional competitive fluids. Non-toxic, recyclable and free of metals harmful to the environment. Available in the following grades: 150, 220, 290.

TURBOFLO XL – Turbine Oil premium turbine fluid designed to lubricate and cool heavy duty steam, hydraulic ad gas turbines and deliver excellent lubrication to bearings operating in severe conditions. Excellent oxidation and thermal stability provides extended drain capabilities even in extreme conditions. Available in ISO grades: 32, 46, and 68.

TURBOFLO EP – Turbine Oil premium turbine fluid designed to provide exceptional anti-wear protection of geared heavy duty turbines with common gear and bearing lubrication systems. Single fluid for steam and gas turbines in both geared and non-geared applications. Available in ISO grades: 32 and 46.

TURBOFLO – Turbine Oil designed to lubricate and cool steam, hydraulic and gas turbines and deliver excellent lubrication to bearings. Minimizes corrosion and oxidation. Excellent water separability, as well as rapid air and gas separation. Available in ISO grades: 32, 46 and 68.

TURBOFLO R & O – Turbine / Circulating Oil primarily recommended for steam and gas turbines as well as circulation oil systems for a wide range of industrial machinery. Extended resistance to oil breakdown caused by air and high temperatures. Available in ISO grades: 10, 22, 32, 46, 68, 100, 220 and 320.

HARNEX 320 – Wind Turbine Oil designed specifically for wind turbines, using polyalphaolefin (PAO) chemistry that delivers good oil film thickness over a broad temperature range. Provides exceptional anti-wear/EP and protection from salt water corrosion. Reduces downtime and maintenance costs, especially beneficial in remote areas.

TURBONYCOIL 600 – Aeroderivative Turbine Fluid specially designed to effectively lubricate land-based Aeroderivative gas turbines operating under extreme conditions. Offers lower volatility and higher flash point than many competitive fluids. Excellent operational properties in extreme hot and cold environments.

CALFLO HTF – Heat Transfer Fluid a high temperature heat transfer fluid formulated to provide long service life. Its unique chemistry does not have the same objectionable odors, workplace health and safety, and environmental concerns of synthetic aromatic compounds. Its low vapor pressure can minimize leakage from control valves and pipe flanges.

CALFLO AF – Heat Transfer Fluid is a highly efficient heat transfer fluid formulated for systems where fluid resistance to oxidative breakdown is critical. Its breakthrough chemistry demonstrates better oxidation stability versus many leading competitive fluids. It provides high thermal efficiency in systems operating up to 316ºC / 600ºF.

PETRO-THERM – Heat Transfer Fluid is a heat transfer oil developed for use in non-pressurized, liquid phase, closed heat transfer systems operating at bulk fluid temperatures up to 315ºC / 599ºF. Provides long, economical service in various industrial process applications.

CALFLO LT – Synthetic Heat Transfer Fluid is a synthetic heat transfer fluid recommended for non-pressurized, liquid phase, closed heat transfer systems that require high thermal efficiency over a wide temperature operating range, from 5ºC/40ºF to 288ºC/550ºF.

LUMINOL TR – Type 1 Electrical Insulating Fluid virtually non-toxic and colorless. Fully compatible with existing mineral oils. Free of carcinogenic polynuclear aromatics (PNAs). Ultra-pure, inherently biodegradable in natural environments.

LUMINOL TRi – Type 2 Electrical Insulating Fluid negative gassing tendency. Ultra-pure, inherently biodegradable in natural environments. Virtually non-toxic and colorless. Excellent heat transfer performance. Fully compatible with existing mineral oils.

LUMINOL Bi – Type 2 Electrical Insulating Fluid ultra-pure, inherently biodegradable in natural environment. Free of carcinogenic polynuclear aromatics (PNAs). Fully compatible with existing mineral oils. Extended service life helps reduce labor costs.

PC WAYLUBE 68 – Way Lubricant designed for slideways of machine tools. Reduces stick-slip chatter. Reduces wear caused by metal-to-metal contact. Available in ISO grade: 68.

ARDEE – Rock Drill Oil ideal for equipment running at high air flow rates and high piston temperatures. Designed for low and high temperature conditions. Available in ISO grades: 32, 46, 68, 100, 150 and 220.

CON-REL-EZE – Concrete Form Oil light viscosity oils designed for spraying forms; may also be used as rust preventatives for machinery and as a penetrating oil on nuts and bolts. Available in 2 viscosity grades: 40 and 60.

SUPER VAC – Vacuum Pump Fluid NSF 2 approved. Delivers extended lubricant life under conditions of high pump load and elevated operating temperatures. Ashless formulation. Available in 3 viscosity grades 15, 19, and 20.